Sonnox Fraunhofer Pro-Codec Manual de usuario descargar pdf (Pagina 15)

5.2 InputandOutputPanels 5 THE PRO-CODEC PLUG-IN

5.2 InputandOutputPanels

The left hand panel of the plug-in features a large input signal meter and a button to

launch the included Manager application for oﬄine encoding and metadata editing. See

section 7 for details. These meters show 2 dB per LED below -12 dBFs, and 0.5dB per

LED above -12 dBFs.

The output panel on the right of the GUI includes a MASTER IN button, for glitch-free

switching between the monitor output of the plug-in (usually a codec output) and the

input signal. The signal you are monitoring is indicated by two LEDs at the top of the

panel, designated INPUT (yellow) and CODEC (green).

A ﬁeld below the MONITOR LEDs displays the TOTAL DELAY through the plug-in, which

is determined by the maximum of each individual codec delay. Click the value ﬁeld to

toggle between milliseconds and samples. The delay value is immediately updated in the

GUI when a new codec or other setting is selected. Depending on the host behaviour, a

new value may not be available for delay compensation until the plug-in is removed and

re-instantiated.

The listen section of the output panel defaults to the CODEC monitor output, but also

contains an option to listen to the diﬀerence between the input and the processed output

by selecting the DIFF button. This is particularly useful for monitoring the audio that is

www.sonnox.com 15 Gotocontents

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 88 89

Sin comentarios

Sonnox Fraunhofer Pro-Codec Manual de usuario Pagina 15